MACRO   Power & Engineering
 

REACTOR BALLAST, MV & MH Control Gear

Click here for HPS Reactor Control Gear
FEATURES:
Long Service Life
Vacuum impregnation
Non-audible noise level
200mm Long Flying Leads Provided
Power Factor Corrected to 0.85 with nominated capacitor
Winding insulation Class H materials
Fixed air Gap ensuring permanent calibration 
Tw150 winding temperature rating
C-tick N3499
OPTIONAL EXTRAS INCLUDE: 
Low Loss Ballast
Timer Long Distance Ignitors 
Thermal Cut Out Fuse 
Change over relay
FINAL TESTING: 
Winding short Circuit
Insulation 
Impedance
Continuity
Last Page
SRM35T
SRM50
SRM70T
SRM80
SRM100
SRMH100T
SRM125
SRM150
SRM150TLL
This Page
SRH35T
SRH50T
SRH70T
SRH100T
SRH150T
Next
RM175
RM250
RH250
RM400
RH400
Next
RM1000
RM1000(415)
RH1000T
. .
. .
Next
RM1500
RM1650
RM2000/240
RM2000/415(8.8A)
RM2000/415(10.3A)
Available from 35 150, SRH Type High Pressure Sodium Reactor Ballast is an inexpensive, compact and simple method for control of HID Lamps. They are made of the highest level of insulation Class H and high permeability silicon lamination for endless years of reliable operation with lower losses and higher efficiency.

LAMP
Ballast
Part
No:
BALLAST
LOSSES
(W)
LINE GEAR
POWER
(W)
VOLT
(V)
I-start
(A)
I-run
(A)
VOLTS
(V)
I-start
(A)
I-run
(A)
Cap
F ≥ 0.85 pf
IGNITOR
MASS
(Kg)
8 85 0.72 0.54 SRH35T 10 240 0.30 0.21 5 IGH104 88
50 90 0.96 0.72 SRH50T 14 240 0.43 0.30 7 IGH104 88
70 90 1.24 1.00 SRH70T 16 240 0.53 0.42 9 IGH104 88
100 100 1.52 1.20 SRH100T 18 240 0.78 0.61 12 IGH104 88
150 100 2.20 1.80 SRH150T 22 240 1.10 0.89 15 IGH104 108
.